1
1. Tilt support lever
4.
Once the outboard motor is supported
with the tilt support lever, press the power
trim and tilt switch "
the trim rods. NOTICE: Make sure that
the trim rods retracts completely dur-
ing mooring. This protects the rods
from marine growth and corrosion,
which could damage the power trim
and tilt mechanism.
1
1. Trim rod
ZMU07744
" (down) to retract
[ECM00252]
ZMU07764
EMU42701
Procedure for tilting down
1.
Push the power trim and tilt switch "
(up) until the outboard motor is supported
by the tilt rod and the tilt support lever be-
comes free.
2.
Release the tilt support lever.
1
1. Tilt support lever
3.
Push the power trim and tilt switch "
(down) to lower the outboard motor to the
desired position.
DN
1
1. Power trim and tilt switch
Operation
"
ZMU07770
"
ZMU07851
70