Specifications And Requirements; Specifications - Yamaha LF115 Owner's Manual

EMU34520

Specifications

TIP:
"(AL)" stated in the specification data below
represents the numerical value for the alumi-
num propeller installed.
Likewise, "(SUS)" represents the value for
stainless steel propeller installed and "(PL)"
for plastic propeller installed.
TIP:
"*" means, select the engine oil referring to
the chart of engine oil paragraph. For further
information, see page 16.
EMU2821C
Dimension:
Overall length:
825 mm (32.5 in)
Overall width:
498 mm (19.6 in)
Overall height L:
F115TR 1609 mm (63.3 in)
Overall height X:
1736 mm (68.3 in)
Transom height L:
F115TR 516 mm (20.3 in)
Transom height X:
643 mm (25.3 in)
Weight (without propeller) L:
F115TR 190.0 kg (419 lb)
Weight (without propeller) X:
195.0 kg (430 lb)
Performance:
Full throttle operating range:
5000–6000 r/min
Maximum output:
84.6 kW@5500 r/min
(115 HP@5500 r/min)
Idling speed (in neutral):
750 ±50 r/min

Specifications and requirements

Engine:
Drive unit:
Type:
4-stroke L
Displacement:
3
1741.0 cm
Bore × stroke:
79.0 × 88.8 mm (3.11 × 3.50 in)
Ignition system:
TCI
Spark plug (NGK):
LFR6A-11
Spark plug gap:
1.0–1.1 mm (0.039–0.043 in)
Control system:
Remote control
Starting system:
Electric
Starting carburetion system:
Electronic fuel injection
Valve clearance (cold engine) IN:
0.17–0.23 mm (0.0067–0.0091 in)
Valve clearance (cold engine) EX:
0.31–0.37 mm (0.0122–0.0146 in)
Min. cold cranking amps (CCA/SAE):
380.0 A
Min. marine cranking amps (MCA/ABYC):
502.0 A
Min. reserve capacity (RC/SAE):
124 minutes
Maximum generator output:
25.0 A
Gear positions:
Forward-neutral-reverse
Gear ratio:
2.15 (28/13)
Trim and tilt system:
Power trim and tilt
Propeller mark:
F115TR K
LF115TR KL
13