Inspecting And Replacing Anode(S); Checking Battery (For Electric Start Models) - Yamaha F200 Owner's Manual

EMU29316

Inspecting and replacing anode(s)

Yamaha outboard motors are protected from
corrosion by sacrificial anodes. Inspect the
external anodes periodically. Remove scales
from the surfaces of the anodes. Consult a
Yamaha dealer for replacement of external
anodes.
ECM00720
NOTICE
Do not paint anodes, as this would render
them ineffective.
1
1. Anode
TIP:
Inspect ground leads attached to external an-
odes on equipped models. Consult a Yamaha
dealer for inspection and replacement of inter-
nal anodes attached to the power unit.
EMU29323
Checking battery (for electric start
models)
EWM01902
WARNING
Battery electrolyte is poisonous and caus-
tic, and batteries generate explosive hy-
drogen gas. When working near the
battery:
Wear protective eye gear and rubber
●
gloves.
Do not smoke or bring any other source
●
of ignition near the battery.
The procedure for checking the battery varies
for different batteries. This procedure con-
tains typical checks that apply to many batter-
ies, but you should always refer to the battery
manufacturer's instructions.
ECM01920
NOTICE
A poorly maintained battery will quickly
deteriorate.
1. Check the electrolyte level.
1
ZMU07784
2. Check the battery's charge. If your boat is
equipped with the digital speedometer,
the voltmeter and low battery alert func-
tions will help you monitor the battery's
charge. If the battery needs charging,
consult your Yamaha dealer.
Maintenance
92