Checking Power Trim And Tilt System - Yamaha F200 Owner's Manual

1
2
3
4
1. Top cowling
2. Protrusion
3. Holder
4. Bottom cowling
5. Push the cowling lock levers inward to
secure the top cowling.
1
1. Cowling lock lever
1
1. Cowling lock lever
6. Check the fitting of the top cowling by
pushing it with both hands. NOTICE: If
the top cowling is not installed cor-
rectly, water can enter the top cowling
and damage the engine, or the top
cowling can blow off at high speeds.
[ECM02370]
2
3
ZMU07757
EMU29159

Checking power trim and tilt system

EWM01930
WARNING
Never get under the lower unit while it is
●
tilted, even when the tilt support lever is
locked. Severe injury could occur if the
outboard motor accidentally falls.
Body parts can be crushed between the
●
motor and the clamp bracket when the
motor is trimmed or tilted.
Be sure no one is near the outboard mo-
●
ZMU07758
tor before performing this check.
1. Check the power trim and tilt unit for any
sign of oil leaks.
2. Operate each of the power trim and tilt
switches on the remote control and en-
gine bottom cowling to check that all
1
switches work.
3. Tilt the outboard motor up and check that
the tilt rod and trim rods are extended
completely.
ZMU07759
Operation
ZMU07760
58