Battery - Yamaha F200 Owner's Manual

Operation
2
1. Tilt rod
2. Trim rod
4. Use the tilt support lever to lock the motor
in the up position. Operate the tilt down
switch briefly so the motor is supported
by the tilt support lever.
1
1. Tilt support lever
5. Check that the tilt rod and trim rods are
free of corrosion or other flaws.
6. Activate the tilt-down switch until the trim
rods have retracted completely into the
cylinders.
59
1
ZMU07762
7.
ZMU07763
8.
EMU36582

Battery

Check that the battery is in good condition,
and fully charged. Check that the battery con-
nections are clean, secure and covered by in-
sulating covers. The electrical contacts of the
battery and cables must be clean and proper-
ly connected or the battery will not start the
engine.
Refer to the battery manufacturer's instruc-
tions for checks for your particular battery.
1
1. Trim rod
Activate the trim-up switch until the tilt rod
is fully extended. Unlock the tilt support
lever.
1
1. Tilt rod
2. Tilt support lever
Tilt the outboard motor down. Check that
the tilt rod and trim rods operate smooth-
ly.
ZMU07764
2
ZMU07765