Main Switch; Power Trim And Tilt Switch On Remote Control - Yamaha F200 Owner's Manual

Components
1. Cord
2. Clip
3. Engine shut-off switch
EMU26091

Main switch

The main switch controls the ignition system;
its operation is described below.
" " (off)
●
With the main switch in the "
tion, the electrical circuits are off, and the key
can be removed.
" " (on)
●
With the main switch in the "
the electrical circuits are on, and the key can-
not be removed.
" " (start)
●
With the main switch in the "
sition, the starter motor turns to start the en-
gine. When the key is released, it returns
automatically to the "
31
ON ON
OFF START OFF START
3
2
1
ZMU05818
" (off) posi-
" (on) position,
" (start) po-
" (on) position.
OFF
ON
OFF START
EMU32053
Power trim and tilt switch on remote
control
The power trim and tilt system adjusts the out-
board motor angle in relation to the transom.
Pushing the switch "
board motor up, and then tilts it up. Pushing
the switch " " (down) tilts the outboard motor
down and trims it down. When the switch is re-
leased, the outboard motor will stop in its cur-
rent position. For instructions on using the
power trim and tilt switch, see pages 66 and
68.
ON
START
ZMU04567
ON
OFF START
ZMU05821
" (up) trims the out-