Loading And Changing The Receipt Paper - NCR 7156 Setup And User Manual

7156 Setup and User's Guide

Loading and Changing the Receipt Paper

Although the illustrations show a used roll being removed, the instructions apply
to loading paper for the first time.
Change the paper when either of the following two conditions occurs:
Caution: Do not operate the printer or host computer if the printer runs out of
paper. The printer will not operate without paper, but it may continue to accept
data from the host computer. Because the printer cannot print any transactions, the
data may be lost.
Paper Status LED (red) flashes: the paper is low
There are approximately 1 ½ to 7 ½ meters (5-25 feet) of paper remaining on
the roll. Change the paper as soon as possible to avoid running out part way
through a transaction.
Depending on the application program, the host computer may alert you when
the paper is low.
Paper Status LED (red) turns on: the paper is out
Change the paper immediately or data may be lost.
Chapter 2: Setting Up and Using the Printer
September 1998 13