Loading And Changing The Receipt Paper - NCR 7167 Owner's Manual

7167 Owner's Manual

Loading and Changing the Receipt Paper

Although the illustrations show a used roll being removed, the instructions apply to loading paper for
the first time.
Change the paper when either of the following two conditions occurs:
•
LED blinks (slow): the paper is low
There are approximately 1 ½ to 7 ½ meters (5-25 feet) of paper remaining on the roll. Change the
paper as soon as possible to avoid running out part way through a transaction.
Depending on the application program, the host computer may alert you when the paper is low.
•
LED blinks (fast): the paper is out
Change the paper immediately or data may be lost.
Caution: Do not operate the printer or host computer if the printer runs out of paper. The printer will
not operate without paper, but it may continue to accept data from the host computer. Because the
printer cannot print any transactions, the data may be lost.
Chapter 3: Solving Problems
November 2003 12