Service Menu; Settings Menu - Mercedes-Benz CL Operator's Manual

Press the = or ; button on the
X
steering wheel to select the
menu.
Press 9 or : to select
X
Assist.
Press the a button.
X
The current selection is displayed.
To activate/deactivate: press the a
X
button again.
Activating/deactivating Active Lane
Keeping Assist
You can use the Lane Keeping Assist
function to activate or deactivate Active Lane
Keeping Assist ( page 330).
Y
Press the = or ; button on the
X
steering wheel to select the
menu.
Press 9 or : to select
X
Keeping Assist.
Press the a button.
X
The current selection is displayed.
To activate/deactivate: press the a
X
button again.
When Active Lane Keeping Assist is activated,
the à symbol appears in the multifunction
display when the ignition is on.
Maintenance menu
In the Service menu, you have the following
options:
calling up display messages (
R
checking the tire pressure electronically
R
( page 461)
Y
calling up a service due date
R
( page 426)
Y
checking the oil level (
R
DriveAssist
Blind Spot
DriveAssist
Lane
page 352)
Y
page 421)
Y
Menus and submenus

Settings menu

Introduction
The Settings menu can be used for:
Switching the daytime running lamps on/
R
off
switching Adaptive Highbeam Assist on/
R
off
showing or hiding the additional
R
speedometer
selecting the units for speed and distance
R
activating/deactivating the radar sensor
R
system
Switching the daytime running lamps
on/off
This function is not available in Canada.
If you have activated the
lights function and the light switch is in the
$ or c position, the daytime running
lamps are automatically switched on when
the engine is running.
Depending on the ambient light, the following
will additionally light up:
parking lamps
R
tail lamps
R
license plate lamp
R
side marker lamps
R
If you turn the light switch to a different
position, the corresponding lights are
switched on. If you switch off the daytime
running lamps at night, make sure that the
light switch is set to L or c.
The factory setting is On.
Press the = or ; button on the
X
steering wheel to select the
menu.
Press the 9 or : button to select
X
daytime running
Press the a button to confirm.
X
To activate/deactivate: press a
X
again.
Daytime running
Settings
lamps.
Z
349