Back Button; Function Buttons; Programmable Button - Mercedes-Benz CL Operator's Manual

The COMAND controller can be:
pressed briefly or pressed and held W
R
turned clockwise or counter-clockwise
R
cVd
slid left or right XVY
R
slid forwards or back ZVÆ
R
slid diagonally aVb
R
In the instructions, operating sequences are
described as follows:
Press the R button.
X
Audio mode is activated.
Select Audio by sliding VÆ and turning
X
cVd the COMAND controller and press
W to confirm.
The audio menu appears.

Back button

Back button
:
To exit the menu: press back button :
X
briefly.
COMAND changes to the next higher menu
level in the current operating mode.
i
You can also exit a menu by sliding XVY
or ZVÆ the COMAND controller.
To switch to the basic display: press and
X
hold back button :.
COMAND changes to the basic display of
the current operating mode.

Function buttons

The COMAND function buttons allow you to
select a main function directly.
Function button for roller sunblind
:
Function button for the radio and the last
;
audio source used
Back button
=
Lumbar support/multicontour seat
?
Function button for telephone and
A
navigation system
Switches COMAND on/off
B
Volume control
C

Programmable button (

D
Example:
To select the radio or CD menu
X
directly: press R button ; once or
twice.
Assigning the programmable button
(favorites)
Programmable button
:
At a glance
113
page 113)
Y
Z