Cleaning Instructions - Mercedes-Benz CL Operator's Manual

At a glance
118
switch SPLITVIEW on and off
( page 119).
Y
The SPLITVIEW screen remains on for
approximately 30 minutes after the SmartKey
has been turned to position 0 in the ignition
lock. After this time or after the SmartKey has
been removed, the settings on the front-
passenger side are saved for approximately
30 minutes longer. After this period,
reactivation on the front-passenger side
means that the settings from the driver's side
will be used.
Swiveling the COMAND display and
setting the brightness
You can swivel the COMAND display
buttons are located beside the COMAND
display.
Swiveling
To swivel the display to the left
:
To swivel the display to the right
;
Not with SPLITVIEW.
4
Setting the brightness
Brightness of the instrument cluster
:
lighting
Brightness of the COMAND display
;
Brighter or dimmer:
4
. The
Turn control : or ; clockwise or counter-
X
clockwise.
i
If Night View Assist Plus is activated, only
the brightness of the multifunction display
is adjusted with control :.
Display design
When the default settings are selected, the
display automatically switches between day
design and night design.
You can change these settings using
COMAND (

Cleaning instructions

! Do not touch the COMAND display. The
display has a very sensitive high-gloss
surface; there is a risk of scratching. If you
have to clean the screen, however, use a
mild cleaning agent and a soft, lint-free
cloth.
The display must be switched off and have
cooled down before you start cleaning. Clean
the display screen, when necessary, with a
commercially available microfiber cloth and
cleaning agent for TFT/LCD displays. Then,
dry the surface with a dry microfiber cloth.
page 130).
Y