Mercedes-Benz CL Operator's Manual page 333

Cl class
Hide thumbs Also See for CL:
Table of Contents

Advertisement

the
mph
display unit is selected, the
assistance range begins at 40 mph.
G
WARNING
Active Lane Keeping Assist does not keep
your vehicle in its lane. It is only an aid and
may detect the lane markings on the road
incorrectly or not at all.
The system may be impaired or may not
function if:
several or no lane markings for a single lane
R
are present.
there is poor visibility, e.g. due to
R
insufficient illumination of the road, or due
to snow, rain, fog or spray.
there is glare, e.g. from oncoming traffic,
R
the sun, or reflection from other vehicles.
the windshield is dirty, fogged up or
R
covered, for instance by a sticker, in the
vicinity of the camera.
the lane markings are worn away, dark or
R
covered up, e.g. by dirt or snow.
the distance to the vehicle in front is too
R
small and the lane markings thus cannot be
detected.
the lane markings on the road are unclear,
R
e.g. near roadworks.
the lane markings change quickly, e.g.
R
lanes branch off, cross one another or
merge.
the road is narrow and winding.
R
Active Lane Keeping Assist cannot detect
road and traffic conditions. It is not a
substitute for attentive driving. You are
responsible for the vehicle's speed, braking in
good time, and steering correctly. Always
adapt your driving style to suit the prevailing
road and weather conditions. Always pay
attention to traffic conditions and your
surroundings. Otherwise, you may fail to
recognize dangers in time, cause an accident
and injure yourself and others.
Driving systems
Warning vibration in the steering wheel
A warning may be given if a front wheel
passes over a lane marking. It will warn you
by means of intermittent vibration in the
steering wheel for up to 1.5 seconds.
In order that you are warned only when
necessary and in good time if you cross the
lane marking, the system recognizes certain
conditions and warns you accordingly.
The warning vibration occurs earlier if:
you approach the outer lane marking on a
R
bend.
the road has very wide lanes, e.g. a
R
freeway.
the system recognizes solid lane markings.
R
The warning vibration occurs later if:
the road has narrow lanes.
R
you cut the corner on a bend.
R
No warning vibration occurs if:
you clearly and actively steer, brake or
R
accelerate.
you cut the corner on a sharp bend.
R
a driving safety system intervenes, e.g.
R
®
ABS, BAS or ESP
.
you switch on the turn signals. In this event,
R
the warnings are suppressed for a certain
period of time.
Lane-correcting brake application
If you leave your lane under certain
circumstances the vehicle will brake briefly
on one side. This is meant to assist you in
bringing the vehicle back to the original lane.
This function is available in the range between
40 mph and 120 mph (60 km/h and
200 km/h).
A lane-correcting brake application can only
be made after driving over a solid,
recognizable lane marking. Before this, a
warning must be given by means of
intermittent vibration in the steering wheel.
In addition, a lane with lane markings on both
sides must be recognized. The brake
331
Z

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cl 550 4maticCl 600Cl 63 amgCl 65 amg

Table of Contents