Activating/Deactivating Cooling With Air Dehumidification; Indicator Lamp - Mercedes-Benz CL Operator's Manual

Operating the climate control systems
264
Activating/deactivating
Turn the SmartKey to position 2 in the
X
ignition lock.
To activate: press the ^ rocker switch
X
up or down.
The indicator lamp in the rocker switch
goes out. The previously selected settings
come into effect again.
To deactivate: press the ^ rocker
X
switch up or down.
The indicator lamp in the rocker switch
lights up.
Activating/deactivating cooling with
air dehumidification
Important information
The cooling with air dehumidification function
is only available when the engine is running.
The air inside the vehicle is cooled and
dehumidified according to the temperature
selected.
G
WARNING
If you switch off the cooling function, the
vehicle will not be cooled when weather
conditions are warm. The windows can fog up
more quickly. Window fogging may impair
visibility and endanger you and others.
Condensation may drip from the underside of
the vehicle when it is in cooling mode. This is
normal and not a sign that there is a
malfunction.
You can activate or deactivate the cooling
with air dehumidification function via
COMAND ( page 241).
Y
i
The cooling with air dehumidification
function uses refrigerant R134a. This
coolant does not contain
chlorofluorocarbons, and therefore does
not damage the ozone layer.
Problems with the cooling with air
dehumidification function
If you can no longer switch on the cooling with
air dehumidification function via COMAND,
the cooling with air dehumidification function
is switched off due to a malfunction.
Consult a qualified specialist workshop.
X
Setting climate control to automatic
G
WARNING
If you switch off the cooling function, the
vehicle will not be cooled when weather
conditions are warm. The windows can fog up
more quickly. Window fogging may impair
visibility and endanger you and others.
In automatic mode, the set temperature is
maintained automatically at a constant level.
The system automatically regulates the
temperature of the dispensed air, the airflow
and the air distribution.
Automatic mode will achieve optimal
operation if cooling with air dehumidification
is also activated. If desired, cooling with air
dehumidification can be deactivated.
Turn the SmartKey to position 2 in the
X
ignition lock.
Set the desired temperature.
X
To switch on: press the à rocker
X
switch up or down.
The indicator lamp in the à rocker
switch lights up.
To deactivate: press the K rocker
X
switch up or down.
The indicator lamp in the à rocker
switch goes out.
or
Set the air distribution using COMAND
X
( page 240).
Y
The indicator lamp in the à rocker
switch goes out.