Service Menu - Mercedes-Benz 2013 C-Class Coupe Operator's Manual

Tire pressure
308
Restarting the tire pressure loss
warning system
Restart the tire pressure loss warning system
if you have:
changed the tire pressure
R
changed the wheels or tires
R
mounted new wheels or tires
R
Before restarting, consult the Tire and
X
Loading Information placard on the
B-pillar on the driver's side or the tire
pressure table on the inside of the fuel filler
flap to ensure the tire pressure in all four
tires is set correctly for the current
operating conditions.
The tire pressure loss warning system can
only give reliable warnings if you have set
the correct tire pressure. If an incorrect tire
pressure is set, these incorrect values will
be monitored.
Observe the notes in the section on tire
X
pressures (
Y
Make sure that the SmartKey is in position
X
2( page 133) in the ignition lock .
Y
Press the = or ; button to select the
X
Service menu.
Press the 9 or : button to select
X
Tire Pressure.
Press the a button.
X
The Run Flat Indicator Active
Press 'OK' to Restart
appears in the multifunction display.
If you wish to confirm the restart:
Press the a button.
X
The Tire Pressure Now OK?
appears in the multifunction display.
Press the 9 or : button to select
X
Yes.
Press the a button.
X
The Run Flat Indicator Restarted
message appears in the multifunction
display.
page 303).
message
message
After a teach-in period, the tire pressure
loss warning system will monitor the set
tire pressures of all four tires.
If you wish to cancel the restart:
Press the % button.
X
or
If the Tire Pressure Now OK?
X
appears, use the 9 or : button to
select Cancel.
Press the a button.
X
The tire pressure values stored at the last
restart will continue to be monitored.
Tire pressure monitor (USA only)
General notes
If a tire pressure monitor is installed, the
vehicle's wheels have sensors that monitor
the tire pressures in all four tires. The tire
pressure monitor warns you if the pressure
drops in one or more of the tires. The tire
pressure monitor only functions if the correct
sensors are installed to all wheels.
Information on tire pressures is displayed in
the multifunction display. After a few minutes
of driving, the current tire pressure of each
tire is shown in the multifunction display.
Example: current tire pressure display
Important safety notes
It is the driver's responsibility to set the tire
pressure to that recommended for cold tires
which is suitable for the operating situation
( page 303). Note that the correct tire
Y
pressure for the current operating situation
must first be taught-in to the tire pressure
monitor. If there is a substantial loss of
message