Importing Contacts; Receiving Vcards - Mercedes-Benz CL Operator's Manual

Telephone
192
The address book organizes and stores
entries that are entered from different
sources (mobile phone, SD memory card,
®
Bluetooth import, COMAND phone book,
navigation). You can use these entries to
make telephone calls and for navigation. You
can create a maximum of 3000 address book
entries.
Importing contacts automatically
COMAND automatically imports contacts
from a mobile phone to the phone book.
In this case, the mobile phone must be active
via the Bluetooth
Depending on the mobile phone, this process
may take some time. Depending on the
mobile phone used, only the phone book
entries in the mobile phone or these entries
and the phone book entries from the SIM card
are imported.
Automatically imported contacts in COMAND
can be identified by the Ã/0 symbol.
These are available to you in COMAND only
when the mobile phone is active via the
®
Bluetooth interface.
Importing contacts manually
i
All the manually imported contacts
remain in COMAND even if you use
COMAND with a different mobile phone.
The entries can be viewed without a mobile
phone. Contacts created in COMAND can
also be viewed without a mobile phone. For
this reason, delete the phone book before
®
interface.
selling or transferring ownership of your
vehicle.
Existing contact data can be imported from
the memory card manually.
To import data: load the memory card.
X
Select Data/Connections
X
telephone basic menu by sliding VÆ and
turning cVd the COMAND controller and
press W to confirm.
Select Download Contacts
X
to confirm.
Select From Memory Card
X
confirm.
Select Add or Overwrite
X
confirm.
If the data has been imported, the
successful message is displayed.
If the COMAND phone book memory is full,
this message appears in the display:
Memory full. Contacts could not be
imported completely.
i
After the data has been imported,
COMAND has to process it. The entries are
only visible in the address/phone book
when this is completed.
Receiving vCards via Bluetooth
You can receive vCards from devices that
support the sending of vCards via
®
Bluetooth . Such devices include PCs.
This requires the device to be authorized in
COMAND. PCs have to be authorized via the
®
Bluetooth device list (
Received vCards are imported into the
address book.
Please bear the following in mind:
in the
and press W
and press W to
and press W to
Import
®
page 135).
Y