Service Menu - Mercedes-Benz Vito 111 CDI/BlueTEC Operating Instructions Manual

On-board computer (vehicles with steering wheel buttons)
238
X
Press : or 9 to set Deactivated,
Standard or Sensitive.
X
Press a to confirm the choice.
If ATTENTION ASSIST is activated, the À
symbol is shown in the status area of the dis-
play. The selection
sets the sensitivity with which the system
determines the attention level.
Further information can be found under "ATTEN-
Y
TION ASSIST" (
Activating/deactivating Blind Spot
Assist
Using the steering wheel buttons
X
Press = or ; to select the
menu.
X
Press : or 9 to select
Assist.
X
Press a to confirm.
The current status is shown.
X
To activate/deactivate: press the a but-
ton again.
Further information can be found under "Blind
Y
Spot Assist" (
Setting Lane Keeping Assist
Using the steering wheel buttons
X
Press = or ; to select the
menu.
X
Press : or 9 to select
Assist.
X
Press a to confirm.
The current selection
is displayed.
X
To change the setting: press a again.
Further information can be found under "Lane
Keeping Assist" (
Standard or Sensitive
page 199).
Assist.
Blind Spot
page 196).
Assist.
Lane Keeping
Standard Adaptive
or
Y
page 198).

Service menu

Overview
Depending on the vehicle's equipment, you have
the following options in the
Calling up display messages in the message
R
Y
memory ( page 259)
Restarting the tyre pressure loss warning sys-
R
tem or checking the tyre pressure electroni-
Y
cally ( page 361)
Calling up the service due date (ASSYST
R
Y
PLUS) ( page 333)
Checking the engine oil level electronically
R
Y
( page 326)
Displaying the AdBlue
R
Y
vehicles ( page 238)
Displaying the AdBlue
The display is only available for BlueTEC
cles.
Use the steering wheel buttons.
X
Press = or ; to select the
menu.
X
Press a to confirm.
Service
menu:
® ®
level in BlueTEC
®
level
®
vehi-
Service