System Settings; Setting; Settings; Display - Mercedes-Benz CL Operator's Manual

System settings

130
Current setting
:
Select the Logic7
X
setting by turning cVd the COMAND
controller and press W to confirm.
Depending on your selection, surround
sound is switched on or off and the menu
is exited.
To exit the menu without saving: press
X
the % back button or slide XVY the
COMAND controller.
i
Please bear the following in mind:
When Logic7
and fader settings should be set to the
center of the vehicle interior to provide the
optimum audio experience for all
passengers.
You will achieve the best sound results by
playing high-quality audio and video DVDs.
MP3 tracks should have a bit rate of at least
128 kbit/s.
Surround sound playback does not
function for mono signal sources, such as
for AM radio mode.
If radio reception is poor, e.g. in a tunnel,
you should switch off Logic7
otherwise switch dynamically between
stereo and mono and cause temporary
sound distortions.
On some stereo recordings, the sound
characteristics may differ from
conventional stereo playback.
® ®
ON or Logic7
®
is switched on, the balance
®
, since it may
System settings
Display settings
Switching the display on/off
Select Vehicle
X
COMAND controller and press W to
confirm.
Select Display OFF
X
COMAND controller and press W to
confirm.
To switch on the display: press W or
X
OFF
cVd turn the COMAND controller.
Display design
Your COMAND display features optimized
designs for operation during daytime and
night-time hours. You can customize the
design to suit your personal preferences by
manually selecting day or night design or opt
for an automatic setting.
Select Vehicle
X
COMAND controller and press W to
confirm.
Select System
X
COMAND controller and press W to
confirm.
Select

Display

X
Select Day
X
Automatic
controller and press W to confirm.
The # icon indicates the current setting.
by turning cVd the
by turning cVd the
by turning cVd the
by turning cVd the
and press W to confirm.
Mode, Night Mode or
by turning cVd the COMAND