Memory Function - Mercedes-Benz CL Operator's Manual

Memory function

106
Make sure that the vehicle is stationary and
X
that the SmartKey is in position 2 in the
ignition lock.
Press button = for the exterior mirror on
X
the front-passenger side.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the preset parking position.
Use adjustment button ; to adjust the
X
exterior mirror. You should see the rear
wheel and the curb in the exterior mirror.
The parking position is stored.
i
If you shift the transmission to another
position, the exterior mirror on the front-
passenger side returns to the driving
position.
i
You can also store the parking position
using memory button M :.
Make sure that the SmartKey is in
X
position 2 in the ignition lock.
With the exterior mirror on the front-
X
passenger side activated, use
adjustment button ; to adjust the
exterior mirror. You should see the
rear wheel and the curb in the exterior
mirror on the front-passenger side.
Press memory button M : and one of
X
the arrows on adjustment button ;
within three seconds.
The parking position is stored if the
exterior mirror does not move.
If the mirror moves out of position, repeat
the steps.
Calling up a stored parking position
setting
Turn the SmartKey to position 2 in the
X
ignition lock.
Adjust the exterior mirror on the front-
X
passenger side with the corresponding
button ( page 104).
Y
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
as soon as you exceed a speed of 9 mph
R
(15 km/h)
about ten seconds after you have
R
disengaged reverse gear
if you press button ? for the exterior
R
mirror on the driver's side
Memory function
Storing settings
G
WARNING
Do not activate the memory function while
driving. Activating the memory function while
driving could cause the driver to lose control
of the vehicle.
With the memory function, you can store up
to three different settings, e.g. for three
different people.
The following settings are stored as a single
memory preset:
seat, backrest, head restraint position and
R
contour of the backrest in the lumbar
region
active multicontour seat: activated/
R
deactivated
multicontour seat: the side bolsters of the
R
seat cushion and the backrest as well as
the contour of the backrest in the lumbar
and shoulder regions