Selecting A Category - Mercedes-Benz CL Operator's Manual

Selecting a category

To call up the category list: select
X
Category by turning cVd the COMAND
controller and press W to confirm.
The category list appears.
To select a category: select a category by
X
turning cVd the COMAND controller and
pressing W to confirm.
The category selected is shown in the
display. You hear the station last selected
for this category.
The All Channels
of the category list. This category is sorted
by channel number and allows you to
browse all available channels.
Selecting a channel
Channel search
Turn cVd or slide XVY the COMAND
X
controller while the display/selection
window in the SatRadio display is active.
COMAND searches in both directions
(ascending and descending) and stops at
the next channel found in the selected
category.
Using the multifunction steering wheel
Press = or ; to select the
X
menu.
Press and hold 9 or :.
X
SatRadio menu
Select Sat. Radio
X
turning cVd the COMAND controller and
press W to confirm.
The SatRadio menu appears.
Entering channel numbers directly
Option 1
Press the Ä button.
X
An input menu appears.
category is at the top
Audio
in the submenu bar by
Option 2
Select Sat. Radio
X
turning cVd the COMAND controller and
press W to confirm.
Select Enter Channel
X
confirm.
An input menu appears.
To enter a channel: irrespective of the
X
option, press the corresponding number
keys on the control panel one after the
other.
COMAND sets the selected channel.
i
You can only select currently permitted
digits.
Selecting a channel from the SatRadio
channel list
Select Sat. Radio
X
turning cVd the COMAND controller and
press W to confirm.
Select Channel List
X
confirm.
The channel list appears.
Select a channel by turning cVd the
X
COMAND controller and press W to
confirm.
Memory functions
Storing channels
i
There are ten presets available.
Press W the COMAND controller when the
X
display/selection window is active.
or
Select Presets in the submenu bar by
X
turning cVd the COMAND controller and
press W to confirm.
In both cases, the channel presets appear.
The R dot in front of a preset position
indicates that the currently selected
channel is stored there.
Audio
in the submenu bar by
and press W to
in the submenu bar by
and press W to
Z
207