Connecting To The Divar The First Time; How To Log On - Bosch DIVAR AN 3000 Manual

DIVAR AN 3000 / DIVAR AN 5000
8.1.2

Connecting to the DIVAR the first time

The video decoder and playback controller is automatically installed on the PC the first time
the user connects the PC to the DVR:
1.
2.
3.
4.
8.2

How to log on

Open IE and input DVR address in the address column. For example, if your DVR IP is
10.10.3.16, then input http:// 10.10.3.16 in the IE address column. See following screen.
The system pops up a warning to ask if you want to install webrec.cab control; click <Yes>.
If you can't download the ActiveX file (from a trusted site), modify your settings as described
in the following steps:
In your browser, choose <Tools> <Internet Options>.
Bosch Security Systems
Open Internet Explorer.
In the address bar, type the address of the unit.
– This can be either the IP address or a DDNS address, if enabled on the unit.
Internet Explorer will prompt to install the OCX software that is used to show live and
playback video.
Once installed, the screen will refresh and prompt for a User ID and Password.
– Once installed on a PC, the Web Client will not need to install the OCX again unless
a new version is released with a new unit firmware.
Operator Manual
Web Client Software | en 111
2013.11 | 1.1 | AM18-Q0669