First Time Operation; Live Viewing - Bosch DIVAR AN 3000 Quick Reference Manual

DIVAR AN 3000 / DIVAR AN 5000
4

First time operation

Once the Startup Wizard steps have been completed, your monitor will show the normal live
mode with real time camera displays ready to operate your system.
From here, you can control your system via menus (Quick menu and Main menu) using the
mouse, front panel buttons or the remote control.
Notice!
The mouse is normally the preferred input device when setting up the system and entering
field values. Clicking the right mouse button is the quickest way to select and leave menus.
See the following descriptions:
–
–
–
–
For a detailed description of configuring and operating the system (plus all technical
specifications), refer to the Operator Manual on the supplied DVD.
4.1

Live viewing

After you log in, the system is in live viewing mode with 1 to 16 camera images on the display.
See following example view.
Figure 4.1: Live view (4 camera views displayed)
This is the normal operating mode of the unit where live pictures are viewed from a maximum
16 connected cameras.
The system date and time is displayed in the top right corner of the screen, and the channel ID
is shown in the bottom left of each channel display.
–
Bosch Security Systems
Live viewing, page 21
Quick menu, page 24
Main menu, page 27
Mouse controls, page 25
To change system date and time, see general settings (Main Menu > Setting > General).
Quick Reference Guide
First time operation | en
2013.11 | 1.1 | AM18-Q0668
21