Bosch DIVAR AN 3000 Manual page 91

DIVAR AN 3000 / DIVAR AN 5000
–
Access to these functions requires the correct user level. Check with your administrator if you
do not have access.
For more information:
–
–
–
Playback and Zoom
Move the mouse to the top centre of the video of the current channel; the system pops up the
playback and zoom interface. See following figure.
Figure 7.8: Playback and zoom
If your mouse stays inactive in this area for more than 6 seconds, the control bar automatically
disappears. See the following table for detailed information on the two preview control
buttons.
See also
–
–
Bosch Security Systems
Sequence
Playback and zoom – see below
see PTZ, page 92
see Sequence, page 92
Icon name
Realtime
playback
Digital zoom
PTZ, page 92
Sequence, page 92
Function
Press to playback the previous 5-60 minutes recorded on the
current channel (default is 5 minutes):
The playback screen supports drag and play function - use your
mouse to drag the play bar to any playback start time.
Use the pause and exit functions as required.
During the preview playback process
– you can not see the channel title and record status of
current channel (they only reappear once you exit preview
playback)
– you can not switch the displayed channel or change current
window-display mode
To set the Realtime play time, go to Main Menu > General.
Note: The system may pop up a dialog box if there is no
recorded data in the current channel.
Zoom in on a specified zone of current channel (zoom-in
function is supported in multiple-channel view).
When you click on the zoom icon it will change to a new icon
; you can now select an area by holding down the left
mouse button and dragging an area on the screen. Release the
mouse and the selected area will be zoomed.
Right-click the mouse to exit the zoomed area.
Exit the digital zoom function at any time by clicking on the icon
again – it will change back to
Operator Manual
Operating instructions | en
.
2013.11 | 1.1 | AM18-Q0669
91