Hdd Info - Bosch DIVAR AN 3000 Manual

102 en | Operating instructions
7.5.1

HDD info

Figure 7.14: HDD info
This top of the screen provides information on the current status of each HDD (O means
current HDD is normal; X means there is a disk error; - means there is no HDD; ? means disk is
damaged).
The list on the bottom half of the screen details the HDD type, total size, and the free space
remaining on the disk.
After a system start, the system will first check for any HDD error. If an error is shown:
1.
2.
See also
–
2013.11 | 1.1 | AM18-Q0669
Check the hard disk time and system time are the same (if necessary, modify system time
in Setting > General and reboot the system).
If error persists, format the HDD and reboot the system.
HDD compatibility, page 158
Operator Manual
DIVAR AN 3000 / DIVAR AN 5000
Bosch Security Systems