First Time Operation; Live Viewing - Bosch DIVAR AN 3000 Installation Manual

DIVAR AN 3000 / DIVAR AN 5000
4

First time operation

Once the Startup Wizard steps have been completed, your monitor will show the live viewing
mode with real time camera displays - see Live viewing, page 21.
From here, you can control your system via menus (Quick menu and Main menu) using the
mouse, front panel buttons, or the remote control.
Notice!
The mouse is normally the preferred input device when setting up the system and entering
field values. Clicking the right mouse button is the quickest way to select and leave menus.
See the following descriptions:
–
–
–
For a detailed description of configuring and operating the system (plus all technical
specifications), refer to the Operator Manual on the supplied DVD.
4.1

Live viewing

After you log in, the system is in live viewing mode with 1 to 16 live images on the display
(from a maximum 16 connected cameras). See following example view.
Figure 4.1: Live view (4 camera views displayed)
The system date and time is displayed in the top right corner of the screen, and the channel ID
is shown in the bottom left of each channel display.
–
–
Bosch Security Systems
Quick menu, page 24
Main menu, page 27
Mouse controls, page 25
To change system date and time, see general settings (Main Menu > Setting > General).
To modify the channel ID, see display settings (Main Menu > Setting > Display).
Installation Manual
First time operation | en
2015.03 | v2.2 | AM18-Q0668
21