44
en | Configuration
Edit a schedule
1.
2.
3.
4.
5.
6.
7.
8.
See also
–
2013.11 | 1.1 | AM18-Q0669
Select the required channel number (select "all" if you want to schedule all the channels).
If required, choose Pre record to start the video recording a few seconds before the
event occurred in the file (from 1 to 30 seconds depending on the bit stream).
If required, choose Snapshot to take a snapshot of the image when an alarm occurs (see
Encode, page 39 for more information on setting up the snapshot).
Choose Period - Monday to Sunday, or all (if the same period is required for each
weekday).
Enter the times required for different periods (maximum six) for different modes.
Assign the mode for each different time period - choose Regular, MD, Alarm and/or MD &
alarm.
If holiday(s) occur in the current week, choose Holiday:
–
Set the specific holiday dates in menu General > Holiday > Setup.
–
Repeat steps 4 to 6 to assign the holiday settings.
After completing the setup, click <OK> to save the settings and return to the previous
menu.
Copy, page 41
Operator Manual
DIVAR AN 3000 / DIVAR AN 5000
Bosch Security Systems