1.4.26 Exit from the maintenance mode (Function code 99)
<Function>
This function allows you to exit from the maintenance mode. If the error related to the fuser
unit occurs, the error is cleared. (Refer to
this
chapter.)
<Operating procedure>
(1) Press the
the maintenance mode. Then, press the OK button. The maintenance mode exits from
the maintenance mode and return to the ready state.
Note:
When a fuser error occurs, be sure to turn ON the power after cooling the halogen
heater sufficiently.
or
button to display "MAINTENANCE 99" on the LCD in the initial state of
5-49
"2.6 How to Recover from Errors of the Fuser Unit" in
Confidential