T1 Registration Front/Rear Sensor Pcb Assy - Brother HL-4140CN Service Manual

9.46 T1 Registration Front/Rear Sensor PCB ASSY

(1) Disconnect the wiring of the T1 registration front/rear sensor PCB ASSY.
(2) Remove the Taptite bind B M3x10 screw to remove the T1 registration front/rear sensor
PCB holder from the PF ASSY.
T1 registration front/rear
sensor PCB holder
(3) Release the three Hooks to remove the T1 registration front/rear sensor PCB ASSY from
the T1 registration front/rear sensor PCB holder.
T1 registration front/rear
sensor PCB ASSY
Harness routing: Refer to
Fig. 3-156
Hook
Fig. 3-157
" PF ASSY"
3-116
Taptite bind B M3x10
Hook
T1 registration front/rear
sensor PCB holder
PF ASSY
Confidential