Brother HL-4140CN Service Manual page 217

(10) Remove the nine Taptite cup S M3x6 SR screws and Taptite bind B M4x12 screw from the
Top drive ASSY.
Taptite bind B
M4x12
FG wire under
bar rear
FG wire under bar rear
Note:
- When removing and installing the Top drive ASSY, be sure to hang the FG wire under
bar rear on the Hook of the Base frame unit as shown in the figure before removing
and installing the Top drive ASSY.
- Be sure to install the FG wire under bar rear in the Top drive ASSY when installing
the Top drive ASSY.
Top drive ASSY
Hook
Fig. 3-81
3-69
Base frame unit
Base frame unit
Taptite cup S
M3x6 SR
Confidential