Brother HL-4140CN Service Manual page 337

■ Reset of inter-color position alignment adjustment (manual)
If adjustment of inter-color position alignment (both auto and manual) cannot be executed
because an incorrect value is inputted in adjustment of inter-color position alignment (manual),
etc., you can clear the input value for adjustment of inter-color position alignment (manual).
<Operating procedure>
(1) Press the or
the maintenance mode. Then, press the OK button. "REGISTRATION" is displayed on
the LCD.
(2) Press the or
the OK button.
(3) "PLEASE WAIT" is displayed on the LCD.
(4) When reset of color registration adjustment is finished, the printer goes back to the initial
state of the maintenance mode.
If you want to perform adjustment of inter-color position alignment again, you may as well
conduct adjustment of inter-color position alignment (auto) of Function code 66.
button to display "MAINTENANCE 66" on the LCD in the initial state of
button to display "MANUAL REG RESET" on the LCD, and then press
5-24
Confidential