Drum Position Sensor Pcb Assy - Brother HL-4140CN Service Manual

9.26 Drum Position Sensor PCB ASSY

(1) Remove the Drum coupling gear Z52 from the Top drive ASSY.
Gear position: Refer to
Note:
Be sure to align the phase before removing the gear.
(2) Disconnect the wiring of the Drum position sensor PCB ASSY.
(3) Release the two Hooks to remove the Drum position sensor PCB ASSY from the Top
drive ASSY.
Hook
Harness routing: Refer to
Drum coupling gear Z52
Top drive ASSY
Fig. 3-90
" Top drive ASSY."
Fig. 3-91
" Top Drive ASSY"
3-75
Drum coupling gear Z52

Drum position sensor PCB ASSY

Top drive ASSY
Hook
Confidential