Strings Before And After Print Jobs - Axis NPS 530 Manual

Section 8: Advanced Options

Strings Before and After Print Jobs

Example 1:
Example 2:
60
These string functions provide a way to send printer control commands
before and after each print job. They may be specified individually for
each logical printer.
All strings are entered as hexadecimal byte values.
Assume that the logical printer PR5 is configured as a PostScript printer.
To append the PostScript End of File character (ctrl-D, hex 04) after each
print job, edit the following entry in your config file:
PR5_AFT.
You have a HP LaserJet printer with dual input bins, and want to print on
pre-printed forms when using the logical printer PR4. The standard
forms are taken from bin 1, and the pre-printed forms are taken from bin
2. The strings before and after print jobs should then contain commands
to select bin 2 ( E &l4H) and bin 1 (
C
lowing entries in your config file:
PR4_BEF.
PR4_AFT.
: 04
E &l1H) respectively. Edit the fol-
C
: 1B 26 6C 34 48
: 1B 26 6C 31 48
Axis NPS 530/532 User's Manual