Install The Nps 530/532 - Axis NPS 530 Manual

Section 5: Setup for OS/2

Install the NPS 530/532

Note:
40
Once the Axis Print Utility is installed and running, you can install the
NPS 530/532 by clicking the Install entry on the action bar. The Install
command initiates a search for Axis print servers on the network. Your
new NPS 530/532 will appear in the list (together with any other Axis
print servers) as a printer port:
AX110086.LP1
The digits following AX are the six last digits of the NPS 530/532 serial
number (110086 in this example). LP1 is the NPS 530/532 printer port
(LPT1).
The Axis print server ports appearing in the list can now be assigned as
print queue destinations as described below.
If the serial number of your NPS 530/532 is 00408C110086, then the
default port name is AX110086.LP1. The serial number is found on the
label at the back of the NPS 530/532. You may change the default names
by editing parameters LPRINT_1, LPRINT_2, etc. in the config file as
described in Appendix A. If you want to change the default port names,
you must do that before installing the NPS 530/532 using Axis Print
Utility.
Axis NPS 530/532 User's Manual