Setup For Macintosh - Axis NPS 530 Manual

Network print server

Hide thumbs Also See for NPS 530:

Table of Contents

Section 7

Setup for Macintosh

Before you begin:

Axis NPS 530/532 User's Manual

The basic setup for Macintosh is done by opening the Chooser window

and clicking a printer.

Before configuring your Macintosh system, you may want to configure

the NPS 530/532 (e.g. logical printer definitions). See Appendix A for

details.

If you intend to operate your NPS 530/532 in a multi-protocol environ-

ment, you should also proceed according to the other "Setup for..." sec-

tions as appropriate.

• Make sure that the NPS 530/532 is powered on and attached to the

network.

• Any network configuration should always involve the network

manager.

Section 7: Setup for Macintosh

Table of Contents