Axis NPS 530 Manual page 19

Network print server

Hide thumbs Also See for NPS 530:

Table of Contents

NPS 530/532

Configuration

Axis NPS 530/532 User's Manual

The configuration involves specifying which NetWare file servers and

print queues the NPS 530/532 shall attach to. This is done using

AXCFG, the Axis NPS configuration software on the disk supplied with

the NPS 530/532. Follow the instructions in the read.me file on the disk

to install the software, then proceed as follows:

1. Start AXCFG, and select NetWare.

2. Select No at the 'Look for old print servers' prompt unless you are

configuring an NPS 530/532 with software revision prior to 4.20.

3. Choose Select All Networks, then select your NPS 530/532.

4. Type root and pass at the login prompt.

5. Select NETWARE MENU.

6. Select LOGIN1.

7. Type the name of the NetWare file server, the print queue, and the

logical printer number. Use the file server and print queue name from

the NetWare configuration above, and one of the logical printer num-

bers 1–8.

8. To specify more print queues, select LOGIN2 through LOGIN16 in

consecutive order. Repeat step 7 for each print queue.

9. Select Save, then select Cancel until AXCFG closes down.

Section 3: Setup for NetWare

Table of Contents