B Internal Printouts - Axis NPS 530 Manual

Network print server

Hide thumbs Also See for NPS 530:

Table of Contents

Appendix B: Internal printouts

Appendix B

Internal printouts

The Test Page

The Parameter

List

The read.me File

There are three different internal printouts that can be printed using the

TEST button on the NPS 530/532 front panel:

The test page shows the software revision and the basic configuration of

the NPS 530/532.

To print the test page, press the TEST button until the STATUS indica-

tor starts to flash, then release the button.

The parameter list (or the config file) shows the complete NPS 530/532

configuration. See Appendix A for a sample parameter list.

To print the parameter list, press the TEST button until the STATUS

indicator starts to flash, release the button, and press it once.

The read.me file contains detailed instructions about how to integrate the

NPS 530/532 for different TCP/IP environments and print methods. It

also contains last-minute information not covered by the printed docu-

mentation, so you should always read this file before starting the integra-

tion.

To print the read.me file, press the TEST button until the STATUS indi-

cator starts to flash, release the button, and press it twice.

Axis NPS 530/532 User's Manual

Table of Contents