Verify The Communication - Axis NPS 530 Manual

LaserWriter 8.0
Printer Driver

Verify the Communication

Note:
Axis NPS 530/532 User's Manual
Open the Chooser window by clicking Chooser in the Apple menu. Fol-
low these steps to choose a printer:
1. Click the LaserWriter 8.0 icon.
2. If your network has more than one zone, click on the zone you want.
If your network has no zones, this box does not appear.
3. Click the name of the printer you want. The default NPS 530/532
printer name is shown as AXIS<nnnnnn>, where <nnnnnn> is the last
six digits of the NPS 530/532 serial number.
Example: AXIS110086
4. Click the 'Setup...' button, and then the 'Select PPD...' button.
5. Choose the PPD file matching your printer, and click 'OK'. If your
printer doesn't appear in the PPD file list, contact your printer ven-
dor. You may also use the Generic PPD if you don't need any printer
specific features.
6. Click 'OK', and then click the close box. This completes the configu-
ration and closes the Chooser.
Repeat this procedure for each Macintosh using the NPS 530/532.
To verify communication by making a test printout, just print a docu-
ment from the desktop or from within a program. The printout will
appear on the printer you have chosen.
You have completed the basic installation and the NPS 530/532 is
ready to use as a print server.
For information on advanced EtherTalk functions such as non-PostScript
printer support, please refer to the AXIS NPS Print Server Technical Ref-
erence.
Section 7: Setup for Macintosh
55