Remote Printer Mode - Axis NPS 530 Manual

Section 3: Setup for NetWare

Remote Printer Mode

Add a Print Server
Create a Print
Queue
Link a Remote
Printer to the
Print Queue
24
The configuration for remote printer mode comprises the following steps:
1. Add a Print Server
2. Create a Print Queue
3. Link a Remote Printer to the Print Queue
4. Configure the NPS 530/532
The NetWare print server software is either installed on a file server
(PSERVER.NLM), or a dedicated workstation (PSERVER.EXE). If you
don't already have a Novell print server installed, please refer to the
Novell documentation for installation procedures.
Print queues are created in the same way as for print server mode. If you
do not need any new queues, skip to "Link a Remote Printer..." below.
1. Log in to a file server from a client workstation.
2. Start PCONSOLE.
3. Select Print Queue Information (3.xx) or Print Queues (4.xx).
4. Press <Insert> to add a new queue.
5. Type a queue name, and press <Enter>. Select a print queue volume
(4.xx only). Repeat steps 4 – 5 for each queue you want to create.
6. Press <Esc> to return to the Main Menu.
The procedures are slightly different depending on which NetWare
version you are using. In either case, begin with starting PCONSOLE
according to steps 1–3 in "Create a Print Queue" above if you have not
already done so.
Axis NPS 530/532 User's Manual