Unix (Tcp/Ip); Apple Ethertalk - Axis NPS 530 Manual

Network print server

Hide thumbs Also See for NPS 530:

Table of Contents

Unix (TCP/IP)

Axis NPS 530/532 User's Manual

Use FTP to change the config file:

1. Log in to the NPS 530/532.

Command: ftp <host name>

Enter root as user id and pass as password.

2. Up-load the config file. Command: get config

3. Edit the file using your favorite text editor.

4. Down-load the config file. Command: put config CONFIG

The NPS 530/532 will automatically activate the new settings.

You will need FTP support (such as the MacTCP utility) to get access to

the config file from your Macintosh. Proceed as described for TCP/IP

above. You can also configure your NPS 530/532 from a NetWare server,

LAN Server/LAN Manager server, or a UNIX host if you have one of

those in your network.

Appendix A: The parameter list

Table of Contents