Axis NPS 530 Manual page 82

Appendix C: Protocol Support Upgrades
Verify the Upgrade
Note:
82
You can verify that the upgrade is successfully completed by printing the
test page after the NPS 530/532 has been restarted. To print the test page,
press the TEST button until the STATUS indicator starts to flash, then
release the button. See Appendix B for a test page sample from an NPS
530/532 in its default configuration.
• If you have upgraded to TCP/IP, the TCP/IP header has changed
from:
** TCP/IP: locked
to:
** TCP/IP: enabled
• If you have upgraded to Apple EtherTalk, the Apple EtherTalk header
has changed from:
** Apple EtherTalk: locked
to:
** Apple EtherTalk: enabled
If the upgrade procedure failed, repeat the process and make sure that you
enter the proper key into the key parameters. Should the upgrade still fail,
contact your distributor.
As an alternative, you can also view the parameter list to verify the
upgrade. After a successful upgrade, the parameters TCP_KEY and/or
ATLK_KEY contain the software key, and parameters TCP_ENB and/or
ATLK_ENB are set to YES. If the upgrade procedure failed, the software
key parameters (TCP_KEY and ATLK_KEY) remain empty.
Axis NPS 530/532 User's Manual