Choose A Printer - Axis NPS 530 Manual

Network print server

Hide thumbs Also See for NPS 530:

Table of Contents

Section 7: Setup for Macintosh

Choose a Printer

LaserWriter 7.0

Printer Driver

Choosing a printer is slightly different depending on which version of

LaserWriter printer driver you are using.

The LaserWriter 7.0 driver assumes that you use a standard PostScript

driver, and cannot take advantage of any printer specific features.

The LaserWriter 8.0 driver uses PPD files that contain printer descrip-

tions. This gives you full control over any features your printer might

have.

Open the Chooser window by clicking Chooser in the Apple menu. Fol-

low these steps to choose a printer:

1. Click the LaserWriter icon.

2. If your network has more than one zone, click on the zone you want.

If your network has no zones, this box does not appear.

3. Click the name of the printer you want. The default NPS 530/532

printer name is shown as AXIS<nnnnnn>, where <nnnnnn> is the last

six digits of the NPS 530/532 serial number.

Example: AXIS110086

4. Click the close box. This completes the configuration and closes the

Chooser.

Repeat this procedure for each Macintosh using the NPS 530/532.

Axis NPS 530/532 User's Manual

Table of Contents