Network Installation - Axis NPS 530 Manual

Network print server

Hide thumbs Also See for NPS 530:

Table of Contents

Network Installation

Before you begin:

Note:

Axis NPS 530/532 User's Manual

• Make sure that your network is ready to accept a new node.

• Any network configuration should always involve the network

manager.

1. Record the serial number of your NPS 530/532. You will need this

number for the setup.

2. NPS 530 only: Connect your NPS 530 to the network using a

twisted-pair (10baseT) Ethernet cable.

3. NPS 532 only: Connect your NPS 532 to the network using a thin-

wire (10base2) Ethernet cable.

Each NPS print server is preconfigured with a unique Node Address

(identical to the serial number). You can change this to a Locally

Administrated Address, see page 68.

The installation is now completed. Proceed with the setup sections for

NetWare, Windows, OS/2, Unix and/or Macintosh.

Section 2: Getting started

Table of Contents