Sharing Print Queues - Axis NPS 530 Manual

Section 5: Setup for OS/2
OS/2 Version 2.x

Sharing Print Queues

42
The print queue assignment procedure under OS/2 version 2.x is done in
one operation – the definition of a printer will automatically create a
queue. Follow these steps to create a print queue and assign it to an NPS
530/532 printer port:
1. Double-click the Templates folder.
2. Drag the Printer icon out to the Workplace Shell (or into a folder),
while holding the right mouse button down.
3. Type a name in Printer Name field.
4. Select a printer driver from the Standard printer list suitable for the
attached printer.
5. Select a pipe name (e.g. \PIPE\AX110086.LP1) from the Port list.
6. Click OK to confirm the new printer definition.
To access a print queue from other computers in the network (either
clients or other servers), the queue must be made a shared resource. Open
an OS/2 window and issue the following command (you will need
administrator privileges to do this):
NET SHARE <queue name> /PRINT
<Queue name> is the queue created above. Note that the queue name
equals the printer name for OS/2 version 2.x, while queue and printer
names may differ for version 1.x.
For further information on queue sharing, please refer to your LAN
Server or LAN Manager documentation.
Axis NPS 530/532 User's Manual