Advertisement
Quick Installation Guide
This guide covers the installation and basic configuration procedures
for the NetWare, Windows, OS/2, Unix, and Macintosh
environments. For advanced configuration and further customizing,
please consult the NPS 530/532 User's Manual.
What is on the disk?
The disk contains installation, configuration and print utilitites for
the different printing environments. Installation instructions are
given for each environment later in this guide.
Installation
The illustration shows the NPS 530. The NPS 532 has
1. Record your NPS 530/532 serial number (you will need it during
the configuration).
2. Switch off the printer.
3. Attach your NPS 530/532 to the printer, either directly to the
parallel port, or using the optional printer cable extension.
4. Connect your NPS 530/532 to the network using a twisted-
pair/10baseT (NPS 530) or thin-wire/10base2 (NPS 532)
Ethernet cable.
5. Switch on the printer.
6. Connect the external power supply.
7. To print the test page, press and hold the test button until the
PACKET indicator starts to flash, then release the button.
FRONT
TEST
POWER
PACKET
BACK
a 10base2 BNC ethernet connector.
TEST Button
POWER Indicator
PACKET Indicator
ETHERNET Connector
External Power
Supply Connector
ETHERNET
Printer Connector
Advertisement
