R e m o v i n g a V R M
securing clip
VRM connector
Grasp the VRM by its top corners, and ease it out of its connector.
4
Installing a VRM
Press the securing clips at each end of the socket outward until they
1
snap open (see
"Removing a
Align the slots on the bottom of the module with the ridges inside the
2
socket.
Press the module straight down into the socket until the securing clips
3
snap into place at the ends of the module.
Install the airflow
shroud.
4
Close the computer
5
Stand the computer upright.
6
Reconnect the computer and devices to their electrical outlets, and
7
turn them on.
VRM").
cover.
VRM
Re movi ng and Inst alli ng Part s
127