Dell Precision WorkStation 530 User Manual page 114

expansion
card
card connector
114 Re m o vi n g a n d I n st a l l i n g Pa r ts
I n s t a l l i n g a n E x p a n s i o n C a r d
Lower the expansion card retention arm and press it into place,
9
securing the expansion card(s) in the chassis.
Connect any cables that should be attached to the card.
10
See the documentation for the card for information about the card's
cable connections.
NOTICE:
Do not route expansion card cables over or behind the expansion
cards. Cables routed over the expansion cards can prevent the computer cover
from closing properly or cause damage to the equipment. Cables routed toward
the rear of the expansion cards can prevent proper airflow from the expansion-
card cooling fan.
Close the computer
11
card retention arm
cover.