Dell Precision WorkStation 530 User Manual page 123

R e m o v i n g t h e M i c r o p r o c e s s o r
microprocessor
microprocessor socket
Install the new microprocessor in the socket:
4
Ensure that the lever on the microprocessor socket is fully
a
extended to the release position.
NOTICE:
When you place the microprocessor in the socket, ensure that the
microprocessor aligns properly with the socket. To avoid damage, you must
position the microprocessor correctly in the socket.
Align pin 1 of the new microprocessor with pin 1 of the socket.
b
NOTE: Pin 1 of the microprocessor is indicated by a small triangle in one
corner of the microprocessor. Pin 1 of the socket is indicated by a small
triangle in one corner of the socket. See
NOTICE:
The microprocessor pins are delicate. To avoid damage, ensure that
the microprocessor aligns properly with the socket, and do not use excessive
force when installing the processor.
Carefully set the microprocessor in the socket and press it down
c
lightly to seat it.
socket lever
"Installing the Microprocessor."
Re movi ng and Inst alli ng Part s
123