50
Adv a n c ed Fe a tu r es
Jumper Settings
The following figure shows the location of the jumpers on the system board.
S y s t e m B o a r d J u m p e r s
NOTICE:
Before changing a jumper setting, verify that the standby power
light on the system board has turned off. Otherwise, damage to your computer
or unpredictable results may occur. To locate this light, see
Components" or the interior service label.
To change a jumper setting, pull the plug off its pin(s) and carefully fit it
down onto the pin(s) indicated.
The following table lists the system board jumpers and their settings.
S y s t e m - B o a r d J u m p e r S e t t i n g s
Jumper
Setting
PSWD
(default)
RTCRST
jumpered
Description
Password features are enabled.
Password features are disabled.
Real-time clock reset. Can be used for
troubleshooting. See
Settings."
unjumpered
PSWD
RTCRST
"System Board
"Reset Corrupted BIOS