Dell Precision WorkStation 530 User Manual page 189

S y s t e m M e s s a g e s ( c o n t i n u e d )
Message
Gate A20 failure
General failure
Hard disk configuration
error
Hard disk controller
failure
Hard disk failure
Hard drive read failure
Invalid configuration
information - please run
SETUP program
Keyboard controller
failure
Keyboard failure
Keyboard stuck key failure
Memory address line
failure at address, read
value expecting value
Memory allocation error
Cause
One or more memory modules may
be loose.
The operating system is unable to
carry out the command.
The hard drive failed initialization.
The hard drive failed initialization.
The system configuration
information does not match the
hardware configuration.
A cable or connector may be loose, or
the keyboard or keyboard/mouse
controller may be faulty.
One or more memory modules may
be faulty or improperly seated.
The software you are attempting to
run is conflicting with the operating
system or another application
program or utility.
Action
See "System Memory Problems."
This message is usually followed by
specific information—for example,
PRINTER OUT OF PAPER. Respond by
taking the appropriate action.
See "Hard Drive Problems."
See "Hard Drive Problems."
Enter system setup and correct the system
configuration information.
See "Keyboard Problems."
See "System Memory Problems."
Turn off the computer, wait 30 seconds,
and turn it on. Try to run the program
again. If the problem persists, contact the
software company.
S o lv ing Pr o b le m s
189