Dell Precision WorkStation 530 User Manual page 13

In addition, take note of these safety guidelines when appropriate:
• When you disconnect a cable, pull on its connector or on its strain-
relief loop, not on the cable itself. Some cables have a connector with
locking tabs; if you are disconnecting this type of cable, press in on the
locking tabs before disconnecting the cable. As you pull connectors
apart, keep them evenly aligned to avoid bending any connector pins.
Also, before you connect a cable, make sure both connectors are
correctly oriented and aligned.
• Handle components and cards with care. Do not touch the
components or contacts on a card. Hold a card by its edges or by its
metal mounting bracket. Hold a component such as a microprocessor
chip by its edges, not by its pins.
Also see "Protecting Against Electrostatic
that you periodically review the safety instructions in your System
Information Guide.
Discharge." Dell recommends
Sa fe t y I n fo r m a ti on
13