Reset Corrupted Bios Settings - Dell Precision WorkStation 530 User Manual

Reconnect the computer and devices to their electrical outlets, and
8
turn them on.
Is the computer working properly?
Yes. The problem is resolved.
No. Go to step 9.
Perform the procedure in
9
Is the computer working properly?
Yes. The problem is resolved.
No. Go to step 10.
Perform the procedure in
10
Is the computer working properly?
Yes. The problem is resolved.
No. Go to step 11.
Perform the procedure in
11
Is the computer working properly?
Yes. The problem is resolved.
No. Go to step 12.
Perform the procedure in
12
Is the computer working properly?
Yes. The problem is resolved.
No. Contact Dell for technical assistance.

Reset Corrupted BIOS Settings

If the computer cannot boot and you have exhausted all other
troubleshooting options, perform the following steps.
CAUTION: Before you perform this procedure, see
For You and Your Computer."
NOTICE: Before disconnecting a device from the computer, wait 10 to 20
seconds after disconnecting the computer from its electrical outlet. Before
removing a component from the system board, verify that the standby power
light on the system board has turned off. To locate this light, see
Components" or the interior service label.
"System Memory Problems."
"Expansion-Card Problems."
"Keyboard Problems."
"Reset Corrupted BIOS Settings."
"Safety First—
"System Board
S o lv ing Pr o b le m s
175